Online Flagging Course - Work Zone Flagger Training

The Work Zone Flagging training course is designated towards individuals looking to become professional flaggers. The Course is designed to prepare workers involved in routine construction operations where the general public and/or workers may be exposed to potential workplace hazards caused by equipment and vehicles. This course will provide a thorough explanation of New York State flagging procedures and regulations.

In order to participate in flagging operations a flagger must identify the source of their flagger training to the engineer and if requested demonstrate their ability to perform flagging procedures correctly. Flaggers not able to perform the proper procedures correctly must be replaced or retrained.

Work Zone Flagger Training Online

The work zone flagger course online grants you the ability to work as a certified flagger as required by the department of transportation and MUTCD. By law, all flaggers must be properly trained in flagging operations and flagging procedures by a certified flagger training instructor. By completing the flagger certification course you will acquire a strong knowledge in proper flagging techniques and be ready to work on the job as a work zone flagger.

Why OSHA Safety Training is Essential

There was a time, way back when, that safety training didn’t exist. Workers were able to walk beams without fall protection, wear less protective gear, and even if there was a safety training program set up, it was seldom followed or just a name; not something that was essentially practiced or required on a construction site.The OSHA act has been out there since 1970 and many other safety programs are available to not only safeguard workers, but also to protect companies. There are numerous reasons why OSHA safety and all other trainings, are extremely important. Many people in the industry frequently forget the logic behind the question: “Why is safety training important?”, so we’ve took it upon ourselves to highlight EXACTLY why safety training programs are essential, regardless of you being an employee or an executive for a specific company.

The reality is that a lot of workers can become weary or feel protected from safety requirements because they experience it day in and day out. They go through the same practice on a daily basis, while some might find it to be a minor point simply because they’ve “been doing it forever” and believe they don’t need to be reminded of standard safety steps. This could undoubtedly lead to accidents, injury, or even casualties as a result of ignorance in safety processes that are designed to shield and protect. For this reason, it is very crucial that you continuously be reminded of not only the fact that safety specifications need to be followed, but also WHY they should be followed. To help you with this, we are going to indicate precisely why safety procedures are essential.

• Financial Reasons - How well you comply with standard safety procedures can have an effect on the company’s bottom line either directly or indirectly.
• Morale - If your site bears an excellent safety plan that is known and trusted by all workers and supervisors, the general morale of ALL of your workers should certainly increase.
• Reputation - This must be obvious, however you would be amazed how many companies don’t take this into consideration.

It isn’t strange to anyone that safety training as well as OSHA safety training is essential for each job site, but, the logical reasons as to why these safety approaches are implemented are too often misinterpreted or over-looked by workers and/or supervisors. The peculiar thing is, it’s not always their fault. It is their duty, as supervisors and executives to understand and comply with all rules and regulations the moment they enter a job site and effectively convey the reasons to why safety training is so necessary.

OSHA Safety Training Courses:

• 10 Hour OSHA
• 30 Hour OSHA
• 4 Hour Supported Scaffold
• 8hr Rigging Foreman Refresher 
• 16 Hour Suspended Scaffold 
• 32 Hour Suspended Scaffold Rigging Foreman

OSHA 10 Hour Certification Training Course Philadelphia PA

Philadelphia, PA - The leader in OSHA safety training and risk management solution, announces the launch of the 10 hours OSHA training course. This addition to the online course library will be instrumental in helping organizations address the needs of teaching up.

According to a 2003 report by the Department of Labor Statistics (BLS), "791 Hispanic workers died on the job, they represent 14% of the 5559 total deaths that occurred in the United States. 791 fatalities represent within 13% of the radius of all workers. "Employers are responsible to protect all employees from injuries at work and with the increase in the Hispanic labor force is essential that companies provide employees with effective learning and knowledge to stay safe at work.

We a recognized leader in OSHA safety training, is committed to improving the safety of all workers on the site. Used by thousands of learners worldwide, the 10 hours OSHA training course it helps individuals improve their knowledge safe and healthy work practices online and on demand. The 10 hours OSHA course delivers the same level of education using the same mode based employment comfortable learning online. After finishing the course, both versions provide the trainee with a card from the Department of Labor.

Philadelphia OSHA 10 Hours Construction Safety Certification Training Course

OSHA 10 hour Safety Training Course Description

Philadelphia, PA - OSHA 10 hour certification training course is design for construction workers, foremen, job supervisors, and all those involved in the construction industry. OSHA Training Program recommends this course as an orientation for safety and health of workers covered by OSHA 29 CFR 1926. Workers must receive certification in additional, when required by OSHA standards, on specification to the workplace hazards. At the successful completion of the course, participants receive an OSHA 10-hour certification card  from Department of Labor within 4-6 weeks.

OSHA 10 Hours Construction Safety Training Course Learning Outcomes:

•   State the purpose of the OSH Act and the list of the functions of OSHA
•   List of inspections on OSHA priorities and describe the inspection process
•   Describe the rights and responsibilities of employers and employees under the OSHA Act
•   The requirements for proper aisle and passageway maintenance
•   Guidelines for identification and the protection of floor aperture
•   To understand the importance of effective protection program output

OSHA 10 Hours Construction Safety Training Course Pre-requisite: None

Testing: All module quizzes require punctuation m n of 70 to move forward on the course. The final exam also requires a punctuation to receive a certificate of the final exam may be taken three times if necessary.

Runtime Description: Once you enroll in the OSHA 10 hour construction training course, you will have 6 months to complete the course. Failure to complete the course in 6 months will not able to get the certificate of the course.

 The OSHA 10 hours of construction certification training course has been reviewed and accepted by OSHA for distribution.

Philadelphia 30-hour OSHA Construction Safety Training Course

Philadelphia, PA - 30 hours OSHA Training Course is designed for managers, immediate supervisors of authorized persons or individuals working directly with subcontractors.

Students in OSHA 30 hour safety training course will expand their knowledge and skills on how to identify hazardous conditions, develop OSHA programs and select teams to adequately address those risks. This course is a program that qualifies as pass / fail. It incorporates extensive theoretical and practical training. Students will become familiar with the standards found in 29 CFR (Code of Federal Regulations) 1926, as well as the tools necessary for future research and problem solving. After completing this course, student records will be sent to regional education center and OSHA course completion card is issued.

Introduction to OSHA

OSHA law, general duty clause, rights and responsibilities of employer and employee rights of complainants.

Basics of record keeping

• Inspections, Citations and Penalties
• General safety and health, Competent Person, Subpart C
• Value of safety and health
• OSHA website and available resources.

OSHA focuses on four hazards

• Anti fall protection: Subpart M (eg, floors, platforms, roofs)
• Electrical Subpart K (eg, overhead power lines in height, power tools and cords, temporary wiring, grounding)
• Strikes: (eg falling objects, trucks, cranes, building masonry walls)
• Caught in / between (eg risks tanks, unguarded machinery, equipment)

 Lifesaving equipment and personal protective health risks in the construction Stairs

• Other themes
• Protection and fire prevention: subpart F
• Material handling, storage, use and disposal: Subpart H
• Tools (manual and electric): Subpart L
• Welding and Cutting: Subpart J
• Scaffold: Subpart L
• Cranes, derricks, hoists, lifts and conveyors: Subpart N
• Motor vehicles, mechanized equipment and marine operations; rollover protective structures and air protection; posters, signs and barricades subparts O, W, and G
• Excavations: Subpart P
• Concrete and masonry construction: Subpart Q
• Steel Erection: Subpart R
• Safety and health program
• Confined space entry
• Powered industrial trucks
• Ergonomics

OSHA New York, NY | OSHA 10 Hour Construction Safety & Health Course

OSHA 10 Applicability

The OSHA 10 Legislation does not apply to projects advertised for bid prior to July 18, 2008.

The OSHA 10 Legislation Only applies to workers on a public work project that are required under Article 8 to receive the prevailing wage.

OSHA 10 Compliance Requirements

Chapter 282 of the Laws of 2007, codified as Labor Law 220-h took effect on July 18, 2008. The statute provides as follows:
The advertised specifications for every contract for public work of $250,000.00 or more must contain a provision requiring that every worker employed in the performance of a public work contract shall be certified as having completed an OSHA 10 safety training course. The clear intent of this provision is to require that all employees of public work contractors, required to be paid prevailing rates, receive such training “prior to the performing any work on the project.”
The Bureau will enforce the statute as follows:
All contractors and sub-contractors must attach a copy of proof of completion of the OSHA 10 course to the first certified payroll submitted to the contracting agency and on each succeeding payroll where any new or additional employee is first listed.
Proof of completion may include but is not limited to:
Copies of bona fide course completion card (Note: Completion cards do not have an expiration date.)
Training roster, attendance record of other documentation from the certified trainer pending the issuance of the card.

Other valid proof

**A certification by the employer attesting that all employees have completed such a course is not sufficient proof that the course has been completed.

OSHA 10 Hour Construction Safety & Health Course

Required on all public work projects of a least $250,000.00

This provision is an addition to the existing prevailing wage rate law, Labor Law §220, section 220-h. It requires that on all public work projects of at least $250,000.00, all laborers, workers and mechanics working on the site, be certified as having successfully completed the OSHA 10-hour construction safety and health course. It further requires that the advertised bids and contracts for every public work contract of at least $250,000.00, contain a provision of this requirement.
Note: The OSHA 10 Legislation only applies to workers on a public work project that are required, under Article 8, to receive the prevailing wage.